What Are The Different Types Of Concrete Additives?

Types Of Concrete Additives

Concrete admixtures (additives) improves the characteristics of concrete for utilization in construction including special demands. Concrete additives are applied to attain the required workability in the situation of low water-cement ratio and to improve the setting time concerning concrete for long-distance hauling of concrete. Here are some of its types.

Kinds Of Concrete Additives

Air Entraining Additives: These are commonly used to increase workability, the efficiency of placing, improved durability, greater protection to frost development and decrease in bleeding. The average Air-Entraining agencies are neutralized vinyl resins, natural wood resins, polyethylene oxide polymers including Sulphonated compounds.

Accelerating Additives: Accelerating admixtures are utilized for faster setting times concerning concrete. It yields higher initial strength improvement in freshly formed concrete.

Retarding Concrete Additive: The purpose of retarding concrete additive is to limit or increase the initial setting time of cement paste in concrete. These remain important for concrete which has to remain conveyed to the long haul in transit machines and effective in putting the concrete at high warmth, especially utilized as grouting additive and water reducers to improve strength and endurance.

High Range Water- Reducing Additives or Super Plasticizers in Concrete: These are the next generation additive and also known as Super plasticizers. These are manufactured chemical products produced from natural sulphonates of nature RSO3, where R denotes a combined organic group concerning higher atomic weight performed under the strictly controlled state.

Silica Fume as a Concrete Additive: The application of silica fume (SF) within concrete has grown significantly within the preceding few years, its useful characteristics were not well-realized till comprehensive analysis was initiated in the late ’70s, early ’80s at the Norwegian Ins. of technology to examine the impact of SF on cement properties.

Selection of Concrete Admixtures

Additives for concrete shall be chosen strictly as per the stipulations and should be applied as approved by the producer or by laboratory testing record. The number of additives to be applied for the particular purpose of admixtures are suggested by the producers.